CLADDING

We offer façade cladding boards from larch, pine, spruce , thermopine – both for wholesale and retail. For Your convenience various profile and dimension options are available. The cladding boards, which we produce, are planed from lumber which is dried to the humidity level KD 18% (± 3%), that is an optimal humidity level for external works.

The cladding boards are not treated with oil, antiseptics or paint… but starting with a certain volume we can offer also painted boards. Various paint tones are available. The client’s satisfaction with the product’s quality is important for us and therefore each board undergoes visual quality control to get satisfied that its surface is free of any defects.

We offer 2 quality standards: 1) AB class and 2) EXTRA class.

Standards lengths are 2.0 m, 3.0 m, 4.0 m, 5.1 m and 6.0 m. But also other lengths are possible both for wholesale and retail.

Profiles and dimensions:

UTV1 /Dimension: 22×145 mm (covering surface 130 mm)

Upper surface smoothly planed with phase at an angle of 45°. Tongue 15 mm long. Downside with compensation grooves preventing the board twisting and cuping.

UTV2 /Dimension: 22×145 mm (covering surface 130 mm)

Upper surface smoothly planed with phase at an angle of 45°, but with 15 mm offset until tongue. Tongue is 15 mm long. Downside with compensation grooves preventing the board twisting and cuping.

UTV3 /Dimension: 22×120 mm (covering surface 113 mm)

Upper surface smoothly planed with phase at an angle of 45°, with 15 mm offset until tongue. Tongue is 7 mm long. Downside with compensation grooves preventing the board twisting and cuping.

UTKL /Dimension: 22×145 mm (covering surface 120 mm)

Upper surface smoothly planed with rounding off and 25 mm offset until tongue, 15 mm overhang over groove and decorative notch. Tongue is 10 mm long. Downside with compensation grooves preventing the board twisting ang cuping.

UTP /Dimension: 22×120 mm (covering surface 110 mm)

Upper surface smoothly planed with rounding off and 10 mm offset until tongue. Tongue is 10 mm long. Downside with compensation grooves preventing the board twisting and cuping.

UTS /Dimension: 22×145 mm (covering surface 135 mm)

Upper surface smoothly planed without rounding off and phases. Tongue is 10 mm long. Downside with compensation grooves preventing the board spinning.

BP2 /Dimension: 22×135 mm

Smoothly planed boards for façade finishing or other application. The edges are rounded to a radius of 3 mm. The lateral sides are executed at an angle of 70°. When patched together a slight overhang appears thanks to which a technological gap between the boards becomes invisible.

We offer also calibrated lathes 45×45 or 22×45

Also any other profiles and dimensions are available for wholesale according to client’s specifications.

 

To find out our warehouse stock which is available at the moment , to find out prices and delivery time, please contact us.

Close Menu